Product Description
Silicorep WR-100 :-
Application Area
Water Repellent treatment for
1:- Cement Painted Surfaces,
2:- Concrete , Mortar,
3:- Clay Brick surfaces,
4:- Natural and artificial stones,
5:- mangalore tiled roofs,
6:- corrugated AC Sheet roofing , etc.
Application Procedure
Open the container apply it by brush or spray pump & allow it to dry for 24 hrs.
Converage :-
50 to 70ft² per lit (depends on surfacr porosity of substrate)
Pack Size :- 1 Lit , 5 lit , 10 lit & 20 lit.
Featured & Benifits
1:- Ease of Application – Rady to use, simply brush able or spray applied .
2:- Stainin – Clear coating does not stain the treated surface,
3:- Appearance – Does not change the appearance of exterior decorative coating .
4:- Vapor transmission – Prevents entry of moisture into the wall, but allows moisture to evaporate out.
5:- Egglorescence – Prevents Efflorescence.
6:- Economical- Cost Effective ,
7:- Penetration - Due to low visocity penetration is high , which provides the hydrophobic zone .