|Home||» Products||» Micro Concrete||» Epoxy For Old to New Concrete Bonding|
Epoxy For Old to New Concrete Bonding
Epoxy resin concrete bonding agent
For bonding new cementitious materials to existing cementitious surfaces. For use on horizontal surfaces an on vertical surfaces where mortar or concrete can be supported by formwork. Ideal for extensions and repairs to structural concrete in buildings, loading bays, bridges, roads, bonded or granolithic floor toppings etc.
- EPBOND EP can be applied by brush.
- More overlay time: Enables to place the concrete up to 6 hrs after applying EPBOND EP, without risk of de lamination
- High bond strength : Bond strength is more than the tensile strength of good quality concrete
- Barrier coat: Acts as a 'barrier coat' to the migration of chloride ions from host concrete.
EPBOND EP is based on solvent free epoxy resins containing pigments and fine fillers. It is supplied as a two part material in pre weighed quantities for ready onsite mixing and use. Colored components - white base and green hardener - provide visual evidence that adequate mixing is achieved.
The Company provides a technical advisory service supported by a team of specialists in the field.
EPBOND EP is designed with an overlay time of 10 hrs at 200C, 6 hours at 300C making it more suitable for use where additional steel reinforcement and formwork has to be fitted or where temperature is high. The minimum application temperature for EPBOND EP is 100C. Consult the local REDWOP office for further information.