|Home||» Products||» Water Proofing||» Bitumineous Sandwich Coat|
Bitumineous Sandwich Coat
Bituminous protective compounds
BITUCOTE M1M is designed to provide a continuous waterproof barrier. Used in conjunction with BITUCOTE, BITUCOTE M1M will provide a dry film thickness complying with BS 8102 for concrete protection and waterproofing. BITUCOTE M1M can be used for repairs to felt/asphalt roofs.
- Asbestos free
- Single component
- Easily and inexpensively applied
- Resistant to most naturally occurring chemicals
- Odorless and taint free when dry
- Excellent flexibility
- Used for over 30 years in a wide range of environments
- Excellent adhesion to most common building substrates
BITUCOTE M1M complies with ASTM D1227:1995, Type 2 : Class 1.
BITUCOTE M1M complies with ASTM C 309 water retention properties, when applied at a rate of 2.5m2/litre.
BITUCOTE M1M is based on selected bitumens that are blended together with non-asbestos reinforcing fibers to provide an outstanding liquid grade material used for intermediate thickness coating. When dry BITUCOTE M1M produces quality, high film build flexible bitumen coating.
Redwop offers a comprehensive range of high performance, high quality repair, maintenance and construction products. In addition, Redwop offers a technical support package to specifiers, end-users and contractors, as well as on-site technical assistance in locations all over the world.
Instructions for use
All surfaces must be clean and dry and all loosely adhering particles such as rust, mill scale, mortar, cement laitance etc should be carefully removed by wire or stiff brushing and finally soft brushing to remove dust. Surfaces must be free from oil and grease. In the case of cementitious surfaces, oil and grease can be removed with proprietary chemical degreaser and in the case of steelwork, oil or grease should be removed by Redwop Solvent 102*. Surfaces to be treated with BITUCOTE M1M coating should always be primed with BITUCOTE.